top of page
Single Button
Two Button
SD-RGB (Single Button Controls)
Standby Functions (Blade Off)
Activate Standby Mode
Hold the button until the switch light illuminates.
Access Boot Sound / Status
Tap the button once while in standby.
Adjust Volume
Hold the button for 1 second, then release.
Change Sound Font
Hold the button for 2 seconds, then release.
Cycle Blade Effects
Hold the button for 3 seconds, then release.
Power Down / Enter Power Saving Mode
Hold the button until you hear “Power Off.”
The saber will automatically enter power saving mode after 10 minutes of inactivity.
Standby Functions (Blade Off)
Activate Standby Mode
Hold PWR until you hear “Power On.”
Access Boot Status
Tap PWR while in standby.
Change Sound Fonts
Tap AUX.
Enter / Exit Volume Adjustment Mode
Hold PWR + AUX together until you hear a beep, then release.
Adjust Volume (While in Volume Mode)
Tap PWR to increase volume
Tap AUX to decrease volume
Switch Blade Effects
Hold AUX for 1 second until you hear a beep, then release.
Power Off
Press AUX three times.
Power Saving Mode
Activates automatically after 10 minutes of inactivity.
Controls While Blade Is Ignited
Blaster Deflect
Tap the button.
Activate Lock-Up
Hold the button for 1 second, then release.
Change Blade Colour
Hold the button for 2 seconds, then release.
Tap the button to cycle through available colours.
Toggle Flash on Clash (FOC)
Hold the button for 3 seconds, then release.
Power Down Saber
Hold the button for 5 seconds, then release.
Gesture Controls (Standby Mode)
Twist Ignition / Retraction
Twist the hilt to ignite or retract the blade.
Change Sound Fonts
Point the blade upward, hold the button, then twist the hilt.
Switch Background Music (BGM)
Point the blade downward, hold the button, then twist the hilt.
Gesture Controls (Blade Ignited)
Switch Blade Effects
Point the blade upward, hold the button, then twist the hilt.
Change Blade Colour
Point the blade downward, hold the button, then twist the hilt.
Flash on Clash (FOC)
Strike the saber to trigger the effect.
Return to Standby Mode
Twist the hilt to return the saber to standby.
Controls While Blade Is Ignited
Blaster Deflect
Tap AUX.
Activate Lock-Up
Hold AUX, then release.
Return to Standby Mode
Tap PWR.
Gesture Controls (Standby Mode)
Access Boot Status
Twist the saber while in standby.
Change Sound Fonts
Point the blade upward, hold AUX, then twist the hilt.
Switch Background Music (BGM)
Point the blade downward, hold AUX, then twist the hilt.
Gesture Controls (Blade On)
Change Blade Colour
Point the blade downward, hold AUX, then twist the hilt.
Flash on Clash (FOC)
Strike the blade to trigger the effect.
Twist Ignition
Twist the saber to ignite when powered off.
Twist Retraction
Twist the saber to power down when ignited.
Single Button
Two Button
Standby Functions (Blade Off)
Wake the Saber
Hold the button until you hear “Power On.”
Ignite Blade
Tap the button.
Adjust Volume (3 Levels)
Hold the button for 1 second, then release to cycle volume modes.
Change Blade Styles
Hold the button for 2 seconds, then release.
Change Ignition Effects
Hold the button for 3 seconds, then release.
Switch Sound Fonts
Hold the button for 4 seconds, then release.
Power Down / Power Saving Mode
Hold the button until you hear “Power Off,” or allow the saber to enter auto power saving mode after 10 minutes of inactivity.
Standby Functions (Blade Off)
Wake the Saber
Press and hold the PWR button until you hear “Power On.”
Change Sound Fonts
Tap the AUX button.
Enter Volume Adjustment Mode
Press and hold PWR + AUX together.
Tap PWR to increase volume
Tap AUX to decrease volume
Exit Volume Mode
Press and hold PWR + AUX again.
Change Blade Style
Hold PWR for 1 second, then release.
Change Ignition Style
Hold AUX for 1 second, then release.
Power Saving Mode
Activates automatically after 10 minutes of inactivity.
Power Off
Press AUX three times.
Controls While Blade Is Ignited
Blaster Deflect
Tap the button.
Activate Lock-Up
Hold the button for 1 second, then release.
Change Blade Colour
Hold the button for 2 seconds, then release.
Toggle Flash on Clash (FOC)
Hold the button for 3 seconds, then release.
Power Down Saber
Hold the button for 4 seconds, then release.
Controls While Blade Is Ignited
Retract Blade / Power Down
Tap PWR.
Blaster Deflect
Tap AUX.
Activate Lock-Up
Hold AUX for 1 second, then release.
Toggle Flash on Clash (FOC)
Press and hold PWR + AUX together.
Gesture Controls (Standby Mode)
Twist Ignition
Twist the saber to ignite.
Change Sound Fonts
Point the blade upward, hold the button, then twist the hilt.
Switch Background Music (BGM)
Point the blade downward, hold the button, then twist the hilt.
Gesture Controls (Blade On)
Twist Retraction
Twist the saber to power down.
Change Blade Colour
Point the blade downward, hold the button, then twist the hilt.
Activate Force Effect
Point the blade upward, hold the button, then twist the hilt.
Flash on Clash (FOC)
Strike the blade to trigger the effect.
Drag Effect
Hold the button and strike the blade.
Melt Effect
Hold the button and thrust the saber fo
Gesture Controls (Standby Mode)
Twist Ignition
Twist the saber to ignite.
Switch Background Music (BGM)
Point the blade downward, hold AUX, then twist the hilt.
Change Sound Fonts
Point the blade upward, hold AUX, then twist the hilt.
Gesture Controls (Blade On)
Twist Retraction
Twist the saber to power down.
Change Blade Colour
Point the blade downward, hold AUX, then twist the hilt.
Activate Force Effect
Point the blade upward, hold AUX, then twist the hilt.
Drag Effect
Hold PWR, then strike the blade.
Melt Effect
Hold AUX, then thrust the saber forward.
Flash on Clash (FOC)
Strike the blade to trigger the effect.
Gesture Controls (Blade On)
Twist Retraction
Twist the saber to power down.
Change Blade Colour
Point the blade downward, hold the button, then twist the hilt.
Activate Force Effect
Point the blade upward, hold the button, then twist the hilt.
Flash on Clash (FOC)
Strike the blade to trigger the effect.
Drag Effect
Hold the button and strike the blade.
Melt Effect
Hold the button and thrust the saber fo
Blade Length Setup
Switch Pixel Blade Length (32” / 36”)
With the saber powered off, press the button three times.
Blade Settings
Adjust Pixel Blade Length (32” / 36”)
With the saber powered off, tap the main button five times to toggle blade length.
Single Button
Power Controls
Ignite Blade
Short press the button while the saber is off.
Muted Ignition
Double press and hold while off.
Power Down / Retract Blade
Hold the button until the blade powers down.
Toggle Battle Mode
Triple press and hold while the blade is ignited.
Two Button
Power Controls
Ignite Blade
Press the PWR button once, or twist the hilt to ignite.
Muted Ignition
Double press PWR while the saber is off.
Power Down / Retract Blade
Press PWR or twist the hilt to power down (avoid twisting while swinging).
Toggle Battle Mode
Hold AUX and swing the blade while ignited.
Sound Fonts & Presets
Play / Stop Background Music
Double press while the saber is off.
Next Preset
Hold the button, then release while off.
Previous Preset
Hold the button and continue holding while off.
Volume Controls
Enter / Exit Volume Menu
Hold the button and clash while the saber is off.
Decrease Volume
Hold then release while in the Volume Menu.
Increase Volume
Tap the button while in the Volume Menu.
Blade Effects
Blaster Deflect
Tap the button while ignited.
Sound Controls
Play Background Music (While Off)
Hold and release PWR.
While On (Blade Pointed Up)
Hold and release PWR.
Silent Mode
Double press PWR while off.
Volume Adjustment
Enter / Exit Volume Menu
Hold PWR + AUX until you hear a beep.
-
Tap PWR to increase volume
-
Tap AUX to decrease volume
Hold PWR + AUX again to exit.
Change Sound Fonts
Next Sound Font
Tap AUX while off with the blade horizontal or pointed upward.
Previous Sound Font
Tap AUX while off with the blade pointed downward.
Combat & Interactive Effects
Multi-Blast Mode
Activate - Swing the saber while holding the button for 1 second, then release.
Exit Multi-Blast
Tap the button.
Clash Effect
Strike the blade during use.
Battle Mode Clash
Clash and pull away quickly.
Lock-Up
Hold the button and clash.
Drag Effect
Hold the button and clash with the blade tip pointed downward.
Melt Effect
Hold the button, thrust forward and clash.
Lightning Block
Double press and hold while ignited.
Force Effect
Point the blade upward, hold the button and twist the hilt.
Stab Effect
Thrust forward and clash.
Additional Features
Colour Change Mode
Point the blade downward, hold the button and twist the hilt.
Select Blade Colour
Hold the button until you hear the confirmation sound.
Check Battery Level
Triple press while the saber is off.
Blade Effects
Blaster Deflect
Tap AUX while ignited.
Blade Effects
Blaster Deflect
Tap AUX while ignited.
Combat & Interactive Effects
Multi-Blast Mode
Activate
Hold and release AUX while the blade is on.
Trigger Blaster Shots
Swing the saber.
Exit Multi-Blast
Tap AUX or activate another effect.
Clash Effect
Strike the blade during use.
Lock-Up
Standard Lock-Up
Hold AUX and clash the blade.
Battle Mode Lock-Up
Clash and hold the blade steady. Pull away to disengage.
Drag Effect
Hold AUX and stab downward.
In Battle Mode
Stab down and pull away to end the effect.
Melt Effect
Hold PWR or AUX, thrust forward and clash.
In Battle Mode
Use the same motion, then pull away to disengage.
Lightning Block
Hold PWR and tap AUX.
Force Effect
Hold and release PWR while ignited.
Stab Effect
Thrust forward and clash.
Disabled in some blade styles.
Additional Features
Colour Change Mode
With the saber ignited, hold AUX and tap PWR (blade horizontal or pointed down).
-
Rotate the hilt to cycle colours
-
Tap PWR to confirm and exit colour selection mode
bottom of page